-- *****************************************************************
-- CISCO-SERVICE-CONTROL-RDR-MIB.my
--
-- MIB file for Cisco Service Control Raw Data Reporter.
-- March 2007, Zaryab Munir.
--
-- Copyright (c) 2007 by cisco Systems Inc.
-- All rights reserved.
--
-- ****************************************************************CISCO-SERVICE-CONTROL-RDR-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter32,NOTIFICATION-TYPE,Gauge32,Unsigned32,
Integer32,TimeTicksFROM SNMPv2-SMI
MODULE-COMPLIANCE,NOTIFICATION-GROUP,OBJECT-GROUPFROM SNMPv2-CONF
InetAddressType,InetAddress,InetPortNumberFROM INET-ADDRESS-MIB
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
entPhysicalIndex,entPhysicalName
FROM ENTITY-MIB
TruthValue,TimeStampFROM SNMPv2-TC
ciscoMgmt
FROM CISCO-SMI;ciscoServiceControlRdrMIB MODULE-IDENTITYLAST-UPDATED"200708140000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-excelsior-dev@cisco.com"DESCRIPTION"This MIB module defines objects describing statistics and
configuration relating to the Raw Data Record Formatter running
on a service control entity.
The Raw Data Record (RDR) formatter is a component implemented
by the service control entity that gathers raw data records
produced by the entity and delivers them to external entities
as reports. The external entities are called RDR destinations
or RDR collectors. The RDR formatter can be configured to send
reports to one or multiple destinations.
RDR formatter can group RDRs into potentially four categories.
RDR mapping to the categories is done by the client application
or the user and reflects different logical destinations or
purposes. For example the application may map Quota related
RDRs to category 1, and Transaction related RDRs to category 2.
The user can configure these categories to different
destinations and assign them with different priorities. Each
category has a separate queue for forwarding the RDRs and has
seperate counters for gathering of statistics (sent, dropped,
queued etc.). An RDR can belong to any one of the category as
chosen by the user or client application.
The RDR formatter supports multiple destinations identified by
IP address and a port number. Each destination is assigned with
a priority for each of the categories. Priority is a number in
the range of 1-100, with 100 being the highest priority. The
priorities are effective only when the formatter is in
forwarding mode 'Redundancy' and are configured during
destination configuration (while assigning the destination with
categories). For example we have destination A configured with
category 1 which is configured with priority 100, destination B
configured with category 1 and priority 80 and destination C
with category 1 and priority 90. When in redundancy mode the
formatter will set the active destination for a category to be
the destination with the highest priority. For category 1 the
active destination will be A. If destination A goes down then
the next destination selected by the formatter as active is
destination C."REVISION"200708140000Z"DESCRIPTION"Initial version of this MIB module"::={ ciscoMgmt 637}ciscoSCRdrMIBNotifs OBJECTIDENTIFIER::={ ciscoServiceControlRdrMIB 0}
ciscoSCRdrMIBObjects OBJECTIDENTIFIER::={ ciscoServiceControlRdrMIB 1}ciscoSCRdrMIBConform OBJECTIDENTIFIER::={ ciscoServiceControlRdrMIB 2}cscRdrFormatterTable OBJECT-TYPESYNTAXSEQUENCEOF CscRdrFormatterEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table lists the operational information and aggregated
statistics for the RDR formatter of a service control entity."::={ ciscoSCRdrMIBObjects 1}cscRdrFormatterEntry OBJECT-TYPESYNTAX CscRdrFormatterEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"This entry contains the operational data and global counters
for the RDR formatter associated with the service control entity
identified by its assigned entPhysicalIndex. An entry exists
for each corresponding row in the entPhysicalTable having one of
the following values assigned to entPhysicalVendorType:
- cevChassisSCE2000
- cevChassisSCE1000
- cevNmeApaModule."INDEX{ entPhysicalIndex }::={ cscRdrFormatterTable 1}
CscRdrFormatterEntry ::=SEQUENCE{
cscRdrFormatterEnable TruthValue,
cscRdrFormatterNumSentReports Counter32,
cscRdrFormatterNumDiscardedReports Counter32,
cscRdrFormatterReportRate Gauge32,
cscRdrFormatterReportRatePeak Gauge32,
cscRdrFormatterReportRatePeakTime TimeTicks,
cscRdrFormatterProtocol INTEGER,
cscRdrFormatterForwardingMode INTEGER}cscRdrFormatterEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies whether the RDR formatter is enabled or
disabled. When the RDR formatter is enabled, it sends the
records it gets from the traffic processors to the RDR
destination as defined in the cscRdrDestTable."::={ cscRdrFormatterEntry 1}cscRdrFormatterNumSentReports OBJECT-TYPESYNTAXCounter32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of reports sent by the
RDR formatter.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrFormatterEntry 2}cscRdrFormatterNumDiscardedReports OBJECT-TYPESYNTAXCounter32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of reports discarded by the
RDR formatter due to insufficient resources or unavailibility
of
the destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrFormatterEntry 3}cscRdrFormatterReportRate OBJECT-TYPESYNTAXGauge32UNITS"reports per second"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the rate at which the RDR formatter is
currently sending reports to all of the destinations."::={ cscRdrFormatterEntry 4}cscRdrFormatterReportRatePeak OBJECT-TYPESYNTAXGauge32UNITS"reports per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the maximum rate at which the RDR
formatter sent reports to all of the destinations since
sysUpTime, if cscRdrCounterDiscontinuityTime is zero. If
cscRdrCounterDiscontinuityTime has a non zero value, the
maximum rate is determined from this value."::={ cscRdrFormatterEntry 5}cscRdrFormatterReportRatePeakTime OBJECT-TYPE
SYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the time elapsed since the
cscRdrFormatterReportRatePeak value occured."::={ cscRdrFormatterEntry 6}cscRdrFormatterProtocol OBJECT-TYPESYNTAXINTEGER{other(1),rdrv1(2),netflowV9(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the RDR protocol currently used by the
RDR formatter.
'other' : The RDR formatter is using a protocol not
recognized by this revision of the MIB.
'rdrv1' : RDR protocol version 1
'netflowV9' : NetFlow ver 9"DEFVAL{ rdrv1 }::={ cscRdrFormatterEntry 7}cscRdrFormatterForwardingMode OBJECT-TYPESYNTAXINTEGER{other(1),redundancy(2),simpleLoadBalancing(3),multicast(4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the mode by which the RDR formatter
sends the reports to its destinations.
'other' : The RDR formatter is using a protocol
not recognized by this revision of the
MIB.
'redundancy' : The reports are sent to the primary
(active destination) and all of the
other destinations are in standby.
'simpleLoadBalancing' : The reports are sent to one
destination
at a time in a round robin manner.
'multicast' : The reports are sent to all of the
destinations."DEFVAL{ redundancy }::={ cscRdrFormatterEntry 8}cscRdrDestTable OBJECT-TYPESYNTAXSEQUENCEOF CscRdrDestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table lists the addresses of the configured RDR
destination servers and the corresponding connection status for
each destination. The RDR formatter sends reports to one or
more configured destinations that have a connection to the RDR
formatter.
This table also shows the current connection status of each
destination."::={ ciscoSCRdrMIBObjects 2}cscRdrDestEntry OBJECT-TYPESYNTAX CscRdrDestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This entry contains the operational data and global counters
for a connection between the RDR formatter destination and the
RDR formatter associated with the service control entity
identified by its assigned entPhysicalIndex. An entry exists
for each corresponding row in the entPhysicalTable having one
of
the following values assigned to entPhysicalVendorType:
- cevChassisSCE2000
- cevChassisSCE1000
- cevNmeApaModule.
Each connection between RDR formatter and RDR destination is
uniquely identified by 'cscRdrDestIndex'."INDEX{
entPhysicalIndex,
cscRdrDestIndex
}::={ cscRdrDestTable 1}
CscRdrDestEntry ::=SEQUENCE{
cscRdrDestIndex Unsigned32,
cscRdrDestInetAddressType InetAddressType,
cscRdrDestInetAddress InetAddress,
cscRdrDestPort InetPortNumber,
cscRdrDestPriority Integer32,
cscRdrDestStatus INTEGER,
cscRdrDestConnectionStatus INTEGER,
cscRdrDestNumSentReports Counter32,
cscRdrDestNumDiscardedReports Counter32,
cscRdrDestReportRate Gauge32}cscRdrDestIndex OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"A monotonically increasing integer for the sole purpose of
indexing RDR destinations. When it reaches the maximum value
the agent flushes the table and wraps the value back to 1."::={ cscRdrDestEntry 1}cscRdrDestInetAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the type of Internet address by which
the RDR destination server is reachable."::={ cscRdrDestEntry 2}cscRdrDestInetAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the RDR destination server IP Address."::={ cscRdrDestEntry 3}cscRdrDestPort OBJECT-TYPESYNTAXInetPortNumberMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the port on which the RDR destination
server listens."::={ cscRdrDestEntry 4}cscRdrDestPriority OBJECT-TYPESYNTAXInteger32(1..100)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the priority given to the RDR destination
server. The RDR formatter determines the priority of a
destination by the value of entPhysicalIndex and the RDR
category of the destination. RDR formatter assigns the highest
priority to the destination which has the same value of
entPhysicalIndex and RDR category as that of the RDR formatter.
The RDR formatter activates the destination server which is
reachable and with the highest priority."::={ cscRdrDestEntry 5}cscRdrDestStatus OBJECT-TYPESYNTAXINTEGER{other(1),active(2),standby(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the status of this RDR destination.
'other' : None of the following.
'active' : The reports are sent to this destination.
'standby': This destination is a backup.
Only one RDR destination can be 'active' if the
cscRdrFormatterForwardingMode is set to either 'redundancy' or
'simpleLoadBalancing'. Multiple RDR destinations can be in
'active' state when cscRdrFormatterForwardingMode is set to
'multicast'."::={ cscRdrDestEntry 6}cscRdrDestConnectionStatus OBJECT-TYPESYNTAXINTEGER{other(1),up(2),down(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the status of the connection between the
RDR formatter and this destination.
'other' : The connection is in some unknown state.
'up' : The RDR formatter can reach this destination.
'down' : The RDR formatter cannot reach this destination."::={ cscRdrDestEntry 7}
cscRdrDestNumSentReports OBJECT-TYPESYNTAXCounter32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of reports sent by the
RDR formatter to this destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrDestEntry 8}cscRdrDestNumDiscardedReports OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of reports dropped by the RDR
formatter for this destination.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrDestEntry 9}cscRdrDestReportRate OBJECT-TYPESYNTAXGauge32UNITS"reports per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the rate at which the RDR formatter is
currently sending reports to this destinations."::={ cscRdrDestEntry 10}cscRdrCategoryTable OBJECT-TYPESYNTAXSEQUENCEOF CscRdrCategoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table describes the operational values and aggregated
statistics of the different categories of the RDR Formatter."
::={ ciscoSCRdrMIBObjects 3}cscRdrCategoryEntry OBJECT-TYPESYNTAX CscRdrCategoryEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This entry contains the operational data and global counters
for a category configured on a RDR formatter of a service
control entity identified by the entPhysicalIndex in the
ENTITY-MIB with the entPhysicalVendorType set to any of the
following values:
'cevChassisSCE2000'
'cevChassisSCE1000'
'cevNmeApaModule'."INDEX{
entPhysicalIndex,
cscRdrCategoryIndex
}::={ cscRdrCategoryTable 1}
CscRdrCategoryEntry ::=SEQUENCE{
cscRdrCategoryIndex Unsigned32,
cscRdrCategoryID Unsigned32,
cscRdrCategoryName SnmpAdminString,
cscRdrCategoryNumSentReports Counter32,
cscRdrCategoryNumDiscardedReports Counter32,
cscRdrCategoryReportRate Gauge32,
cscRdrCategoryNumQueuedReports Gauge32}cscRdrCategoryIndex OBJECT-TYPESYNTAXUnsigned32(1..4)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object indicates the category number, index to the
table."::={ cscRdrCategoryEntry 1}cscRdrCategoryID OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"This object indicates the unique id assigned to this RDR
category by the RDR formatter."::={ cscRdrCategoryEntry 2}cscRdrCategoryName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the human readable name assigned to this
RDR category by the RDR formatter. The client application
provides the RDR formatter with the value of this object."::={ cscRdrCategoryEntry 3}cscRdrCategoryNumSentReports OBJECT-TYPESYNTAXCounter32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"This object indicates the number of RDR reports sent over this
category.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrCategoryEntry 4}cscRdrCategoryNumDiscardedReports OBJECT-TYPESYNTAXCounter32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of RDR reports dropped for
this category.
Discontinuities in the value of this counter can occur at
disabling/enabling of the RDR formatter, and at other times
as indicated by the value of cscRdrCounterDiscontinuityTime."::={ cscRdrCategoryEntry 5}cscRdrCategoryReportRate OBJECT-TYPESYNTAXGauge32
UNITS"reports per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the rate at which the RDR formatter is
currently sending reports over this category."::={ cscRdrCategoryEntry 6}cscRdrCategoryNumQueuedReports OBJECT-TYPESYNTAXGauge32UNITS"reports"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the number of pending RDR reports within
this category."::={ cscRdrCategoryEntry 7}cscRdrCategoryDestTable OBJECT-TYPESYNTAXSEQUENCEOF CscRdrCategoryDestEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"This table lists the operational data for RDR destination
servers for each RDR category for a service control entity."::={ ciscoSCRdrMIBObjects 4}cscRdrCategoryDestEntry OBJECT-TYPESYNTAX CscRdrCategoryDestEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This entry contains the operational data for a category of
RDR formatter for a destination server of the service control
entity identified by the entPhysicalIndex in the ENTITY-MIB with
the entPhysicalVendorType set to any of the following values:
'cevChassisSCE2000'
'cevChassisSCE1000'
'cevNmeApaModule'."INDEX{
entPhysicalIndex,
cscRdrCategoryIndex,
cscRdrDestPort,
cscRdrDestInetAddress
}::={ cscRdrCategoryDestTable 1}
CscRdrCategoryDestEntry ::=SEQUENCE{
cscRdrCategoryDestPriority Integer32,
cscRdrCategoryDestStatus INTEGER}cscRdrCategoryDestPriority OBJECT-TYPESYNTAXInteger32(1..100)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the priority configured for this category
on the RDR destination server. The priority is determined by
entPhysicalIndex and the category of the destination server."::={ cscRdrCategoryDestEntry 1}cscRdrCategoryDestStatus OBJECT-TYPESYNTAXINTEGER{other(1),
active(2),standby(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the status of this RDR destination for
this category.
'other' : None of the following.
'active' : The reports are sent to this destination.
'standby': This destination is a backup.
Only one RDR destination can be 'active' if the
cscRdrFormatterForwardingMode is set to either 'redundancy' or
'simpleLoadBalancing'. Multiple RDR destinations can be in
'active' state when cscRdrFormatterForwardingMode is set to
'multicast'."::={ cscRdrCategoryDestEntry 2}cscRdrNotifsConfig OBJECTIDENTIFIER::={ ciscoSCRdrMIBObjects 5}
cscRdrCounterDiscontinuityTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of service up time on the most recent occasion at
which any one or more of the RDR counters suffered a
discontinuity. If no such discontinuities have occurred since
the last re-initialization of the local management subsystem,
then this object contains a zero value."::={ ciscoSCRdrMIBObjects 6}cscRdrReportsEnableNotifs OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object controls whether the system produces notifications
defined in thi MIB. A 'false' value will prevent the
notifications from being generated by this system."::={ cscRdrNotifsConfig 1}
cscRdrCategoryStoppedDiscardingReportsTrap NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
cscRdrCategoryID
}STATUScurrentDESCRIPTION"The system generates this notification to indicate that the
system has recovered from congestion or unavailibility of the
RDR collector identified by the value of cscRdrCategoryID and
has stopped discarding reports being sent to this RDR
collector."::={ ciscoSCRdrMIBNotifs 1}cscRdrCategoryDiscardingReportsTrap NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
cscRdrCategoryID
}STATUScurrentDESCRIPTION"The system generates this notification to indicate that the
system has either encountered congestion or unavailibility of
the RDR collector with the category identified by the value of
cscRdrCategoryID and has started discarding reports destined to
this collector. The value of cscRdrCategoryNumReportsDiscarded
indicates the number of discarded reports."::={ ciscoSCRdrMIBNotifs 2}cscRdrNoActiveConnectionTrap NOTIFICATION-TYPEOBJECTS{ entPhysicalName }STATUScurrentDESCRIPTION"The system generates this notification to indicate that there
is no active connection between the RDR formatter and any
collector."::={ ciscoSCRdrMIBNotifs 3}cscRdrConnectionStatusDownTrap NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
cscRdrDestStatus,
cscRdrDestInetAddress,
cscRdrDestPort
}
STATUScurrentDESCRIPTION"The system generates this notification to indicate that a
connection to destination has transitioned to the 'down' state."::={ ciscoSCRdrMIBNotifs 4}cscRdrActiveConnectionTrap NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
cscRdrDestInetAddress,
cscRdrDestPort
}STATUScurrentDESCRIPTION"The system generates this notification to indicate that a
connection to the destination address cscRdrDestInetAddress has
become active on TCP port cscRdrDestPort."::={ ciscoSCRdrMIBNotifs 5}cscRdrConnectionStatusUpTrap NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
cscRdrDestStatus,
cscRdrDestInetAddress,
cscRdrDestPort
}STATUScurrentDESCRIPTION"The system generates this notification to indicate that a
connection to the destination address cscRdrDestInetAddress has
become transitioned to 'up' state on TCP port cscRdrDestPort."::={ ciscoSCRdrMIBNotifs 6}-- ConformancecscRdrMIBCompliances OBJECTIDENTIFIER::={ ciscoSCRdrMIBConform 1}cscRdrMIBGroups OBJECTIDENTIFIER::={ ciscoSCRdrMIBConform 2}cscRdrCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMP Agents which implement this
MIB."
MODULE-- this moduleMANDATORY-GROUPS{
cscRdrObjectGroup,
cscRdrNotificationGroup,
cscRdrCounterDiscontinuityGroup
}GROUP cscRdrNotifsControlGroup
DESCRIPTION"This is optional group."::={ cscRdrMIBCompliances 1}-- Units of ConformancecscRdrObjectGroup OBJECT-GROUPOBJECTS{
cscRdrFormatterEnable,
cscRdrFormatterNumSentReports,
cscRdrFormatterNumDiscardedReports,
cscRdrFormatterReportRate,
cscRdrFormatterProtocol,
cscRdrFormatterForwardingMode,
cscRdrDestInetAddressType,
cscRdrDestInetAddress,
cscRdrDestPort,
cscRdrDestPriority,
cscRdrDestStatus,
cscRdrDestConnectionStatus,
cscRdrDestNumSentReports,
cscRdrDestNumDiscardedReports,
cscRdrDestReportRate,
cscRdrCategoryName,
cscRdrCategoryNumSentReports,
cscRdrCategoryNumDiscardedReports,
cscRdrCategoryReportRate,
cscRdrCategoryNumQueuedReports,
cscRdrCategoryDestPriority,
cscRdrCategoryDestStatus,
cscRdrFormatterReportRatePeak,
cscRdrFormatterReportRatePeakTime,
cscRdrCategoryID
}STATUScurrentDESCRIPTION"This group of objects maintains informative data for RDRs."::={ cscRdrMIBGroups 1}
cscRdrNotificationGroup NOTIFICATION-GROUPNOTIFICATIONS{
cscRdrActiveConnectionTrap,
cscRdrCategoryStoppedDiscardingReportsTrap,
cscRdrCategoryDiscardingReportsTrap,
cscRdrNoActiveConnectionTrap,
cscRdrConnectionStatusDownTrap,
cscRdrConnectionStatusUpTrap
}STATUScurrentDESCRIPTION"This group contains notifications for this MIB."::={ cscRdrMIBGroups 2}cscRdrNotifsControlGroup OBJECT-GROUPOBJECTS{ cscRdrReportsEnableNotifs }STATUScurrentDESCRIPTION"This is a collection of objects to control the enable/disable
state of notification generation."::={ cscRdrMIBGroups 3}cscRdrCounterDiscontinuityGroup OBJECT-GROUPOBJECTS{ cscRdrCounterDiscontinuityTime }STATUScurrentDESCRIPTION"A collection of objects providing information specific to
RDR counter discontinuities."::={ cscRdrMIBGroups 4}END